Follow Us! Like Our Page!

Denison Announces 2020 Phoenix Expansion Drilling Returns Best Results to date at Zone C

Press Release

TORONTO, Feb. 9, 2021  – Denison Mines Corp. (“Denison” or the “Company”) (TSX: DML) (NYSE: DNN) is pleased to report the results from the 2020 exploration and expansion drilling program focused on the area proximal to the high-grade Phoenix uranium deposit (“Phoenix”) at the Company’s 90% owned Wheeler River Uranium Project (“Wheeler River”). During the program, 19 drill holes were completed for a total of approximately 7,400 metres – all of which were located outside of the extents of the mineral resources currently defined at Phoenix.  The results from the program were highlighted by the intersection of high-grade uranium mineralization in Zone C, where no mineral resource is currently estimated:

  • 5.69% U3O8 over 5.0 metres in WR-328D1, located approximately 22 metres northeast of historic mineralized hole WR-368 (1.59% U3O8 over 2.0 metres); and
  • 8.84% U3O8 over 2.5 metres in WR-767D1, located approximately 35 metres to the northeast of WR-328D1.

The mineralization in WR-328D1 and WR-767D1 represent the best mineralized intersections returned to date from exploration drilling at Phoenix Zone C. View PDF version

Andy Yackulic, P. Geo., Denison’s Director, Exploration, commented, “The grades and thicknesses of the mineralized intersections from the 2020 Phoenix Zone C drilling represent a significant upgrade compared to historical drilling at Zone C. With each successive hole at Zone C, Denison’s exploration team becomes more optimistic about the prospect of delineating an additional mineralized zone that could potentially be incorporated into future development plans for the Phoenix In-situ recovery (“ISR”) operation.”

This press release constitutes a “designated news release” for the purposes of the Company’s prospectus supplement dated November 13, 2020 to its short form base shelf prospectus dated June 2, 2020.

Phoenix Zone C

Zone C is the southwestern-most mineralized zone at Phoenix (see Figure 1). Prior to the 2020 drilling program, Zone C was defined over a strike length of approximately 250 metres by only five mineralized intersections.  Historic exploration drilling at Phoenix was largely focused on the delineation of Zone A and Zone B.  As a result of the lack of historical drilling at Zone C, no resource estimate exists for the mineralization previously identified at Zone C.

The 2020 drilling program was designed to test the continuity and extents of known mineralization at Zone C. Eleven drill holes were completed at Zone C in 2020 for a total of 4,600 metres. Three of these drill holes returned uranium mineralization, successfully extending the mineralized zone’s strike length by approximately 20 metres to the southwest and delineating a potential high-grade mineralized “core.” Mineralized intersections from 2020 drilling at Zone C are outlined in Table 1 and illustrated in Figure 2.

With Denison’s recent decision to adopt a freeze wall design and phased mining approach, as part of the ISR mining operation planned for the Phoenix deposit (See Denison’s news release from December 1, 2020), it is possible that further exploration could result in the delineation of a mineral resource that could become a future mining “phase” at Phoenix.  Additional drilling will be required to determine the extent of uranium mineralization at Zone C.

Table 1 – Phoenix Zone C Mineralized Intersections

Hole-ID

From (m)

To (m)

Length (m)

U3O8(%)

WR-328D11,3,4

376.4

381.4

5.0

5.69

WR-767D11,3,4

382.0

384.5

2.5

8.84

WR-7712,3,4

376.5

377.5

1.0

0.89

Notes: 

(1) Intersection interval is composited above a cut-off grade of 1.0% U3O8;
(2) Intersection interval is composited above a cut-off grade of 0.1% U3O8;
(3) WR-328D1 was drilled at an azimuth of 333.7° and an inclination of -80.3°. WR-767D1 was drilled at an azimuth of 310.4° and an inclination of -79.3°. WR-771 was drilled at an azimuth of 310.0° and an inclination of -79.5°.
(4) Lengths indicated are the down-hole length and do not represent the true thickness of mineralization. True thickness is estimated to be approximately 98% of stated downhole length.

Phoenix Zone A and Zone B

Eight diamond drill holes totalling 3,796.0 m were completed to test the extents of known mineralization at Zones A and B.  While several drill holes intersected weak uranium mineralization, the only notable potential extension of existing mineralization was reported in drill hole WR-765D1 in Zone B – which intersected 0.36% U3O8 over 3.5 metres (from 401.3 to 404.8 metres), drilled at an azimuth of 332.3° and an inclination of -79.6°, approximately 15 metres east of WR-333 (which previously intersected 14.6% U3O8 over 6.0 metres).

Sampling and Assay Procedures

Drill core with anomalous total gamma radioactivity (>300 counts per second using an RS-120 or RS-125 scintillometer) was sampled over 0.5 metre intervals. Sampling is undertaken on site by splitting the core in half, with one half submitted for analysis and the other half retained in the core box for future reference. Uranium chemical assays are performed by the Saskatchewan Research Council (“SRC”) Geoanalytical Laboratories located in Saskatoon. Sample preparation involves crushing and pulverizing core samples to 90% passing -106 microns. Splits of the resultant pulps are initially submitted for multi-element ICP-MS analysis following partial (HNO3:HCl) and total (HF:HNO3:HClO4) digestions.  Samples with ≥ 1,000 ppm U (partial digest) are re-assayed for U3O8 using an ISO/IEC 17025:2005 accredited method for the determination of U3O8 weight percentage. Pulp splits are digested using aqua-regia, and the solution analyzed for U3Oweight percentage using ICP-OES. In addition to internal checks by SRC Geoanalytical Laboratories, the Company has rigorous quality assurance and quality control (“QAQC”) procedures, including the insertion of standard reference materials, blanks and field duplicates. The assay data is subject to verification procedures by qualified persons employed by Denison prior to disclosure. For further details on the assay, QAQC and data verification procedures, please see Denison’s Annual Information Form dated March 13, 2020, filed under the Company’s profile on SEDAR (www.sedar.com).

About Wheeler River

Wheeler River is the largest undeveloped uranium project in the infrastructure rich eastern portion of the Athabasca Basin region, in northern Saskatchewan – including combined Indicated Mineral Resources of 132.1 million pounds U3O8 (1,809,000 tonnes at an average grade of 3.3% U3O8), plus combined Inferred Mineral Resources of 3.0 million pounds U3O8 (82,000 tonnes at an average grade of 1.7% U3O8). The project is host to the high-grade Phoenix and Gryphon uranium deposits, discovered by Denison in 2008 and 2014, respectively, and is a joint venture between Denison (90% and operator) and JCU (Canada) Exploration Company Limited (10%).

The Wheeler River Pre-Feasibility Study (“PFS”) was completed in late 2018, considering the potential economic merit of developing the Phoenix deposit as an ISR operation and the Gryphon deposit as a conventional underground mining operation.  Taken together, the project is estimated to have mine production of 109.4 million pounds U3O8 over a 14-year mine life, with a base case pre-tax NPV of $1.31 billion (8% discount rate), Internal Rate of Return (“IRR”) of 38.7%, and initial pre-production capital expenditures of $322.5 million. The Phoenix ISR operation is estimated to have a stand-alone base case pre-tax NPV of $930.4 million (8% discount rate), IRR of 43.3%, initial pre-production capital expenditures of $322.5 million, and industry leading average operating costs of US$3.33/lb U3O8.  The PFS is prepared on a project (100% ownership) and pre-tax basis, as each of the partners to the Wheeler River Joint Venture are subject to different tax and other obligations.

Further details regarding the PFS, including additional scientific and technical information, as well as after-tax results attributable to Denison’s ownership interest, are described in greater detail in the NI 43-101 Technical Report titled “Pre-feasibility Study for the Wheeler River Uranium Project, Saskatchewan, Canada” dated October 30, 2018 with an effective date of September 24, 2018.  A copy of this report is available on Denison’s website and under its profile on SEDAR at www.sedar.com and on EDGAR at www.sec.gov/edgar.shtml.

Denison suspended certain activities at Wheeler River during 2020, including the EA process, which is on the critical path to achieving the project development schedule outlined in the PFS.  While the EA process has resumed, the Company is not currently able to estimate the impact to the project development schedule outlined in the PFS, and users are cautioned against relying on the estimates provided therein regarding the start of pre-production activities in 2021 and first production in 2024.

About Denison

Denison is a uranium exploration and development company with interests focused in the Athabasca Basin region of northern Saskatchewan, Canada. In addition to the Wheeler River project, Denison’s Athabasca Basin exploration portfolio consists of numerous projects covering over 250,000 hectares. Denison’s interests in the Athabasca Basin also include a 22.5% ownership interest in the McClean Lake joint venture (“MLJV”), which includes several uranium deposits and the McClean Lake uranium mill, which is currently processing ore from the Cigar Lake mine under a toll milling agreement, plus a 25.17% interest in the Midwest and Midwest A deposits, and a 66.90% interest in the Tthe Heldeth Túé (“THT,” formerly J Zone) and Huskie deposits on the Waterbury Lake property. Each of Midwest, Midwest A, THT and Huskie are located within 20 kilometres of the McClean Lake mill.

Denison is engaged in mine decommissioning and environmental services through its Closed Mines group (formerly Denison Environmental Services), which manages Denison’s Elliot Lake reclamation projects and provides post-closure mine care and maintenance services to a variety of industry and government clients.

Denison is also the manager of Uranium Participation Corp., a publicly traded company which invests in uranium oxide and uranium hexafluoride.

Qualified Persons

The technical information contained in this release has been reviewed and approved by Mr. Andrew Yackulic, P. Geo., Denison’s Director, Exploration, who is a Qualified Person in accordance with the requirements of NI 43-101.

Figure 1 – Phoenix Deposit – 2020 Exploration Drilling

Figure 2 – Phoenix Zone C – 2020 Exploration Drilling

David Cates, (416) 979-1991 ext 362, President and Chief Executive Officer; Sophia Shane, (604) 689-7842, Investor Relations

IBF4

Loading

NationTalk Partners & Sponsors Learn More